Technical data

ASTi ACE Studio Components Reference Guide Rev. M DOC-01-TELAS-CRG-4
Copyright © 2014 Advanced Simulation Technology inc. 127
8.3. SpeakerOutput
Summary: Retrieves audio from the Highways soundfield that is intended for a
speaker at the specified X, Y, Z position.
Description: SpeakerOutput creates a speaker in the Highways Service with the
specified X, Y, and Z coordinates relative to the soundfield reference point,
extracting the audio from the service for the speaker. The X, Y, and Z position
should correspond to the speaker’s physical location. Typically, the AudioOut is
linked directly to an AmpOut component’s audio out.
For example, if using an eight channel crown amp to drive an 8 speaker setup, the
model should contain 8 SpeakerOuts linked to 8 AmpOut components.
Audio Output
AudioOut
Type Default Value
audio n/a
Description: Audio for this speaker.
Internal Parameter
Position
Type Default Value
worldposition_ geocentric (0,0,0)
Description: The X, Y, and Z position of the speaker relative to the
reference point. The coordinate system is the same as the one used in
the Highway > AuralCuePos component (+X is forward, +Y is to
the left, and +Z is up).
Source-
Speaker
Type Default Value
id unassigned
Description: Selects the speaker for sound positioning.