Technical data

DOC-01-TELAS-CRG-4 ASTi ACE Studio Components Reference Guide Rev.M
114 Copyright © 2014 Advanced Simulation Technology inc.
NoiseFilter
2_Frequen
cyInput
Type Default Value
float32 1.0
Description:
FrequencyFunction: Provide frequency control connections for one
of the two bandwidth limited noise sources.
FrequencyFunctionScalar: Scaling factors for each noise
frequency control.
FrequencyResult: The roll-off frequency (in Hertz) of one of the
two bandwidth limited noise sources used to produce the engine
hiss/roar.
OutGain
Type Default Value
float32 1.0
Description: The OutGain applies amplitude gain control to the out-
put signal. If no external control is connected to OutGain, the scale
factor is used as the OutGain values.
Whine
Tone1
Type Default Value
Description: Provides control connection for one of the three whine
tones.
Control Inputs
WhineTon
e1_GainIn
put
Type Default Value
float32 1.0
Description: Provides control connections for one of the three
whine gains.
GainFunction: Connections to a selected table or function for
controlling the whine gains based upon the input control connection.
GainFunctionScalar: The scaling factors for the whine gain control
GainResult: The final gain factor for one of the three triangle waves
used to produce the engine whines.
Whine
Tone1_Fre
quency
Type Default Value
float32 1.0
Description: The frequency (in Hertz) of one of the three triangle
waves used to produce the engine whines.
Whine
Tone2
Type Default Value
Description: Provides control connection for one of the three whine
tones.
WhineTon
e2_GainIn
put
Type Default Value
float32 1.0
Description: Provides control connections for one of the three
whine gains.
GainFunction: Connections to a selected table or function for
controlling the whine gains based upon the input control connection.
GainFunctionScalar: The scaling factors for the whine gain control
GainResult: The final gain factor for one of the three triangle waves
used to produce the engine whines.
Control Inputs