Technical data

ASTi Telestra 4 Training Manual (Ver. 1, Rev. F)
Copyright © 2010 Advanced Simulation Technology inc. 83
10. Add a new sound and type in the name of the sound. Then double-click under the Path
column, where it says ‘Select...’ and select the soundfile.
11. Repeat step 10 for the second sound file.
12. Click ‘Apply’ and then ‘Ok’ to close the window.
13. Navigate to the model canvas and open the Playsound component. Set the LibraryId
value under the value of the sound library.
14. Open the ACUchannel_B_PTT and set the ACU identifier and channel.