Technical data

ASTi Telestra 4 Training Manual (Ver. 1, Rev. F)

5. The Sine_Wave1 and ACU1 must be linked together to route audio out. To connect

Sine_Wave1 to ACU1, middle-click on Sine_Wave1 which will open the Link Editor.

6. To link the signal, select the Sine_Wave1 with the OutSignal to ACU1 with the AudioOut

signal, as shown below.

Note: The signal options will appear after selecting each component.

7. Click the plus symbol (+) button to create the link.

8. Apply the changes.

9. Connect a headset to channel A of the ACU and listen to the sine wave.