Technical data

ASTi Telestra 4 Training Manual (Ver. 1, Rev. F)

6.6.1. Radio Filters

The Radio Monitor provides the ability to view radios available on the ASTiNet, DIS or both net-

works. Use the filter to filter out a network or view both at the same time. Filter the radios as

transmitters or receivers or by assigned Domain name or view all Domains.

Ethers identify groups of radio types that inter-operate with each other. For example, AM and FM

radios operate in the same “Generic” ether so when an AM and FM radio have the same fre-

quency, they interfere with each other. On the other hand, Intercom radios and VoIP radios do not

interact with AM or FM radios or with each other. They are each in their own ether.

Filter radios by the following:

• All Ethers - view all radio types

• Generic - view AM, FM, CW, USB, LSB, SSBF, Jammer, Pulse, SATCOM (tunes via fre-

quency)

• Intercom - view only intercoms (tunes via channel number)

• VoIP - view only VoIP (tunes via net name)

• HaveQuick - view only HaveQuick (tunes via spread spectrum net ID)

• SINCGARS - view only SINCGARS radios

Other filters include:

• Center of the Earth - radios located at the center of the earth (0,0,0)

• Expired - radios that are timed out

• Active - active radios on the network

Figure 7: Radio Filters