Technical data

ASTi Telestra 4 Training Manual (Ver. 1, Rev. F)
108 Copyright © 2010 Advanced Simulation Technology inc.
7. Open the Telestra Editor. Right-click on the Telestra in the graphical layout and select
‘Edit’.
a. Select the Sim Server tab, and select the
DIS_Gateway.
b. Select the SM tab, and select HHT State
Machine.
i. If you check the Ident then the Identifier
listed in the Radio Helper is shown on the
HHT. If it is not checked then the Identifi-
ers display as 1, 2, 3, etc.
c. Select ‘Update.’