Technical data

ASTi Telestra 4 Training Manual (Ver. 1, Rev. F)

2.1. Target

ASTi’s Target consists of a high performance, network scalable, Red Hat

Enterprise Linux

based hardware platform. The Target runs as an embedded realtime platform, providing high

fidelity radio and communications and environmental cue modeling using ACE software. The

Target BIOS are setup based on each system’s specific board, see the Target Cold Start Procedure

for more information (DOC-02-TEL4-TCS-1).

The platform components consist of:

•Intel

multi-core processor (This may vary depending on time of purchase and possible

CPU upgrades.)

• Removable Serial ATA 80 GBytes drive

• Serial ATA DVD/CD drive

• Dual Core Advandtech motherboard (core 1 non-real-time, core 2 real-time)

• 3-5 Network Ports depending on system (eth1 is always dedicated to ACENet)

• Standard 2U 400 watt or greater auto-sensing power supply

• Standard KVM connections (mouse, keyboard, and monitor)

For more information on the Target, please see the Telestra 4 Target Operation and Maintenance

Manual (DOC-01-TEL4-TUG-1).

Removable drive

Power Button

Reset Button

DVD/CD Drive

Status Indicator

Lights

Figure 2: Target Front Panel