Technical data

ASTi Telestra 4 Training Manual (Ver. 1, Rev. F)
100 Copyright © 2010 Advanced Simulation Technology inc.
17.Open the Transceiver and assign the Transceiver ID (must be the same as the RCU). Set
the Radio Name, Domain Name, Protocol ID, and World Position Bus.
Note: You will have to return to the Project level (Project Manager) and add the Domain
using the Domain Editor.
Repeat this step and the previous step (16) for Folder2 using the corresponding bus and
radio name.
The model is complete, two operators should be able to communicate through the local radio.