Technical data

ASTi Telestra 4 Training Manual (Ver. 1, Rev. F)
96 Copyright © 2010 Advanced Simulation Technology inc.
6. Right-click and copy Folder1, then right-click and paste it. Rename it ‘Folder2.’
7. Open Folder2 and open the Geodetic component and create a new EntityBus.
8. Set the Radio Bus for both Transceivers in Folder1 (Radio1) and Folder 2 (Radio2).
9. In the model, add a new folder and name it ‘Operator1’.
Add a CommPanel > CommPanel4 and assign Sig1 to RadioBus1.
Add an I/O Interface > ACE-RIU Channel and set the Identifier value with the ACE-
RIU name and Channel to channel A (or to a channel with connected audio peripherals).
10.Right-click on the Operator1 folder and copy it. Right-click and paste the folder renam-
ing it ‘Operator2’.