Technical data

ASTi Telestra 4 Target Operations & Maintenance Manual (Ver. 1, Rev. K)

Objects lists the number of transmitter and entity objects on the HLA network. For trans-

mitters, the local counter reflects the number of local transmitter objects while the rti

counter reflects the number of remote objects. For entities, the local counter reflects the

number of entities the federate has detected on the HLA network. The attached counter

reflects the number of local radios that are attached to existing entities.

BYE

This command can be entered at any time to gracefully leave the HLA federate application. If

joined, the Target will not resign before exiting.

DEBUG {value}

This command can be entered at any time and is used to display or set the current debug level.

If the command is entered without a value it will display the current debug level. If entered

with a level that debug level will be set.

The debug level parameter determines which combination of debug messages are printed to

the file. The value is derived from a debug mask described in the following table.

Remote Control Debug Levels

Level Debug Mask Position Description

0 Off

1 General (required to print any debug

ssages)

2 RTI Object Activity

4 New Ethernet Object Info

8 Name Information

16 Ethernet Activity

32 RTI Activity

64 Handle

128 Translate

256 Timeouts

512 Convert

1024 Context

For example, to log “Name Info”, you would set the debug level to 9, which is 8 (Name Info)

plus 1 (turn logging on). Setting the debug level to 8 would not work, because it represents 8

(Name Information) plus 0 (logging off).

If you wanted to log “RTI Object Activity”, “New Ethernet Object Info”, “Ethernet Activity”,

and “RTI Activity”, but NOT “Name Info”, you would set the debug level to 55 (32 + 16 + 4