User's Guide

4. Barcode and RFID Scan
Device Connect
Barcode and Tag Readig
1. When the device is connected, 'Disconnected' in the Stauts Bar changes
to 'Connected' and the device is automatically powered on.
2. Select the desired mode. Barcode mode, RFID mode, Dual mode can be
selected, and if you select Dual mode, both barcode and RFID tag can be
read.
3. Read the tag by pressing both buttons on the device at the same time or
by using the Read button in the App. Use the Stop button to stop reading.
4. The read barcode or tag information is displayed on the App.
- The switch at the bottom of the APP can turn the device on and off.
- Press the Clear button to delete the barcode and tag information from
the App.
UserApp Manual