User's Manual

Toggle switch and screen switch
3
3.1 Toggle Switches
When you use the Gravio matrix led, you can control whether the matrix uses gravity
sensing to rotate the picture by flipping the switch. When the flipping switch is on the right,
the gravity sensing is turned on. At this time, when you rotate the Gravio matrix led, the
picture will be Follow the rotation, always facing up; when the toggle switch is on the left, the
gravity sensor is turned off, no matter how you rotate the Gravio matrix led, the picture will
not rotate
3.2 screen Switches
screen switch can control the screen switch.
3.3 Pair button
When you need to wirelessly transmit pictures to Gravio matrix led, you need to add it to
the zigbee gateway network now. When the gateway is allowed to access the network, press
and hold the pair button for 5 seconds, and the zigbee icon on the screen will flash. At this
time, it will be added to the network of your gateway soon. After joining the network, the
flashing zigbee picture will be displayed. Prohibited, at this time you can transfer pictures or
animations through the host computer
Network access steps: (for example we use Gravio Receiver2)
Insert Gravio receiver into pc, mac or linux, open serial debugging tools, such as sscom