User Manual

Astera LED Technology GmbH
User Manual for FP1 Titan Tube™ 2018-11-01
Page | 22
INPUT SELECT
CRMX wirel. DMX
INPUT SELECT
APP CONTROL
7.12 INPUT SELECT
The light accepts several input sources. By default, it is set to AUTO. In this mode, it listens to all
sources, and the first source that becomes active is latched. Once a source is latched, the
light will not listen to any other source anymore.
This latched source is cleared by powering down the light or changing the INPUT SELECT
manually.
Auto mode; the lights waits for
any input signal and latches the
first detected source.
In standalone mode, neither
wireless DMX nor remote control
is accepted.
The light can be controlled by
the AsteraApp™, but any DMX
signal is ignored.
The light can be controlled via
its XLR socket, any wireless
signals are ignored
Only wireless DMX from Astera
ART3 (sold 2009-15) is accepted,
all other sources are ignored.
Only CRMX/W-DMX wireless
DMX is accepted, all other
sources are ignored.
The following table shows what sources are accepted for each setting:
Source INPUT
SELECT
Auto, none latched
Auto, Sta
ndalone
latched
Auto, App control
latched
Auto, Astera wirel. DMX latched
Autp, CRMX wirel. DMX latched
STANDALONE
APP CONTROL
ART3 DMX
CRMX wirel. DMX
Wired DMX
AsteraApp™: change colors
●
●
●
AsteraApp™: STANDBY, RUNTIME, ALARM
●
●
●
●
●
●
AsteraApp™: DMX Settings
●
●
●
●
●
●
●
●
●
ART3 DMX
●
●
●
CRMX Wireless DMX
●
●
●
●
Wired DMX
●
●
●
●
Infrared Remote
●
●
●
●
●
●
The Light’s Control Panel
●
●
●
●
●
●
●
●
●
●
Main menu:
INPUT SELECT
INPUT SELECT
AUTO
INPUT SELECT
STANDALONE
INPUT SELECT
ART3 DMX
INPUT SELECT
Wired DMX