User Manual

Astera LED Technology GmbH
User Manual for FP1 Titan Tube™ 2018-11-01
Page | 17
7.3 WAYS TO CONTROL
The light can be controlled in several ways:
Use Astera’s ARC1 infrared remote control, point it at individual lights and
press the desired effect. Note that the IR sensor is on the back side next to the
display.
The AsteraApp™ is an efficient way to quickly create a customized light
show. It can group several lights together, address individual lights or groups
of lights, and send complex effects with a user defined color palette to all
lights in range. For additional information refer to chapter 8.
The light can be controlled via DMX or Ethernet cable when connected to
the PowerBox (see chapter 4.5).
The light can also be controlled by wireless DMX, the built-in receiver is
compatible with all LumenRadio* CRMX transmitters as well as W-DMX™* G2,
G3, G4 and G4S transmitters (G4 and G4S in 2.4 GHz mode only).
Power the light on/off, set a static color or change its settings.
*CRMX is a trademark of LumenRadio AB, W-DMX is a trademark of Wireless Solutions Sweden AB
7.4 CONTROL BY INFRARED WITH ARC1
The light can be controlled by the infrared remote control if:
 INPUT SELECT is set to AUTO or REMOTE CONTROL (refer to chapter 7.12).
 The light is currently NOT operated by DMX. If it is, only ON and OFF will work while
INPUT SELECT is set to AUTO.
The ARC1 is very handy to switch several lights on or off at a time. The ARC1 can also accept
configuration commands that are sent from the AsteraApp™ to a light by pressing the
POWER ON button.