User's Manual

Astera LED Technology GmbH
AX1 Technical Reference Manual 2020-08-25
Page | 29
8.15.3 Input Select
The light accepts several input sources. By default, it is set to AUTO. In this mode, it listens to all
sources, and the first source that becomes active is latched.
Once a source is latched, the light will not listen to any other source anymore.
This latched source is cleared by powering down the light or changing the INPUT SELECT
manually.
Auto mode; the lights waits for
any input signal and latches the
first detected source.
Only wired DMX input is ac-
cepted (currently possible for
AX5 and Titan Tube), all other
sources are ignored.
Only CRMX and W-DMX signals
are accepted, all other sources
are ignored.
Only signals from the Astera
ART3 transmitter (sold 2009-2015)
are accepted.
The light can be controlled by
the AsteraApp™,
but any DMX signal is ignored.
In standalone mode, neither
DMX nor App control is accept-
ed.
The following table shows what sources are accepted for each setting:
Source INPUT SELECT
Auto, none latched
Auto, Standalone
latched
Auto, App Control latched
Auto, ART3 DMX latched
Auto, CRMX wirel. DMX latched
Standalone
App Control
ART3
DMX
CRMX wirel
ess DMX
AsteraApp™: change colors
●
●
●
AsteraApp™: STANDBY, RUNTIME, ALARM
●
●
●
●
●
●
AsteraApp™: DMX Settings
●
●
●
●
●
●
●
●
ART3 DMX
●
●
●
CRMX Wireless DMX
●
●
●
Infrared Remote
●
●
●
●
●
●
The Light’s Control Panel
●
●
●
●
●
●
●
●
●
Input Select
Auto
Standalone
WiredDMX
CRMX Wireless DMX
ART3 DMX
App Control