User's Manual

Astera LED Technology GmbH
AX1 Technical Reference Manual 2020-08-25
Page | 28
8.15 DMX SETTINGS
To efficiently use the light with DMX, some settings can be adjusted by the AsteraApp™.
Press the
“DMX Configuration” button.
Adjust all settings to your
requirements, then press
“Send”.
Your lights will start to flicker.
Tap the lights you wish to
setup (chapter 7.9).
Then press “Done”.
8.15.1 DMX Address
The address can be either entered directly, or adjusted by the “+” and “-“ buttons.
8.15.2 DMX Failure
It can be set what the lights should do when the DMX signal is lost.
The last DMX input is still shown,
even if the DMX signal is lost.
The light will show a 4000K white
as soon as the DMX signal is lost.
The light will go dark if
DMX signal is lost.
The light will switch temporarily
to standalone mode if the DMX
signal is lost and show for
example a preset static color.
Auto
Hold
Emergency Light
Blackout
Standalone