User's Manual

Astera LED Technology GmbH
AX1 Technical Reference Manual 2020-08-25
Page | 26
8.13 ANTI-FLICKER
The PWM refresh rate of this light is 599.4 Hz by default. This frequency can be freely adjusted
between 200 Hz and 1205 Hz to fit different cameras frame rates.
Make sure you have
targeted the lights you wish
to adjust (chapter 8.5).
Then press the “Anti-Flicker”.
Slide the “fps” to adjust to
default values for a
framerate.
Slide the “Hz” to fine-adjust.
Press the highlighted
frequency to enter a
custom value between
200 and 1205 Hz.
NOTE:
The Anti-Flicker adjustment is preserved in case the lamp is powered off.
It is set back to the default 599.4Hz once a Reset Settings (chapter 7.6) is done.
The adjusted frequency is used no matter what input source is currently active.
Also during DMX operation.