User's Manual

Astera LED Technology GmbH
AX1 Technical Reference Manual 2020-08-25
Page | 12
7.6 BUTTON
Press Button
Function
Press the button shortly show the status display.
Hold the button until the light turns on or off
Blue Mode: hold the button, the light will first turn off, then
back on again and it blinks blue. Chapter 7.8 explains the
Blue Mode.
Reset Settings: hold the button, the light will first turn off,
then back on again and it blinks blue. Keep holding the
button until blinking stops the light comes on red again.
NOTE:
Reset Settings also removes any CRMX / W-DMX pairing of the light.
7.7 STATUS DISPLAY
The lights main LED is double-used to display the battery status.
7.7.1 While Powered OFF
If the light is connected to the charger, the main LED either shows the battery status or is dark
to indicate that charging has finished and the battery is full.
7.7.2 While Powered ON
Press the button and the main LED will show the battery-or charging-status for two seconds.