Owner's Manual

Getting Started 09
User Guide
Digital Output
1. Connect an external device to the 3.5mm [UNBAL.2] port
on the front of the product using the Optical cable.
2. Enable output format conversion from [Menu > Settings >
S/PDIF Conversion] to convert the output to a predefined
format upon S/PDIF connection.
Optical
Cable
Analog Input/Output
1. Connect an external device to the [RCA IN]/[RCA OUT] port
on the back of the product using the RCA cable.
Do not move the product while a cable is connected.
RCA Cable L/R
DSD format is converted to PCM when using S/PDIF OUT.
With PCM, the output bit (16/24-bit) and sample (48/96/192 kHz)
rates can be selected.
The volume will be fixed at the maximum level.
Audio may not be reproduced if the specifications of the external
device and output format are incompatible. Refer to the respective
instruction manual of each device before use.