Owner's Manual

Getting Started 08
User Guide
Connecting to S/PDIF OUT
DSD format is converted to PCM when using S/PDIF OUT.
With PCM, the output bit (16/24-bit) and sample (48/96/192 kHz)
rates can be selected.
The volume will be fixed at the maximum level.
Audio may not be reproduced if the specifications of the external
device and output format are incompatible. Refer to the respective
instruction manual of each device before use.
XLR cable is not included in the product package.
1. Using an optical cable, connect the KANN CUBE to a
S/PDIF-capable external device to output music through
the external device. Enable output format conversion from
[Menu > Settings > S/PDIF Conversion] to convert the
output to a predefined format upon S/PDIF connection.
Connecting to XLR OUT
1. Music can be played back on an XLR-capable external
device via an XLR cable. To activate XLR audio output,
enable the function in the Settings Menu [Menu > Settings
> XLR]. or from the quick settings menu, active the XLR
icon in the notification panel.