Operating instructions

2
IMPORTANT INFORMATION
Before using the mast carefully read the operating instructions herein.
DO NOT use the mast unless it is fully extended.
DO NOT drive vehicle with the mast extended (ensure isolating magnetic
switch is installed)
DO NOT attempt to rotate the mast unless fitted with a rotating system.
(NRB/229R)
Beware of overhead cables.
DO NOT exceed 30p.s.i maximum mast pressure
(Ensure safety relief – valve is installed)
Only use Superfluid and Kilfrost as recommended by SMC/Hilomast LLC.
DO NOT operate the mast
- Outside of the operating temperature range -30ºC to +70ºC
- At wind speeds or payloads in excess of those recommended
Note that the warranty will be invalidated in the event that:
 Specified oils and lubricants are not used, or
 Recommended service intervals are not maintained, or
 The mast is operated only partially pressured or extended
 The mast is operated within a moving vehicle or trailer, or
 Maximum working pressures, loading or wind loading are exceeded, or
 The mast is operated at temperatures outside the recommended range, or
 Non-accredited installation, or service work is undertaken, or
 SMC or Hilomast LLC supplied spares are not used, or
 The installation and operating instructions are not adhered to.
NO LIABILITY WILL BE ACCEPTED FOR DAMAGE OR INJURY CAUSED BY THE
MAST CONTACTING POWER LINES OR BY ACTIONS OUTSIDE OF THOSE
RECOMMENDED BY SMC/HILOMAST LLC.