User Guide

asTech Duo User Guide
©asTech 2022 V10
19
Activating Duo on the asTech Device
This only needs to be performed once as you will be using the Duo app for
performing Local and submitting Remote OEM scans.
1
Your asTech device with firmware version
2.01 (or higher)
can switch between
communicating with the asTech Duo or being
used in the standard mode to submit Remote
OEM scans via asTech Connect.
Pressing the yellow
WPS button 8 times in
rapid succession will switch the device
between modes.
2
If you are activating Duo mode, the screen
will display
asTech Duo Enabled future use
momentarily and then
display Waiting for
App…
. Once connected to your Duo, the
screen will display Connected!
3
If you are activating the standard mode, the
screen will display
asTech Duo Disabled
future use.
momentarily and then Connected
& Waiting
once logged in.