User's Manual

2.1.1 WLAN Driver/Utility Installation

1. Insert the installation CD into your CD-ROM drive. The setup program will start

automatically.

2. Click “Next” to go to next screen.

3. Select the destination folder. To install to the default folder as shown below, click “Next” to

go to the next screen.

4. During installation, Driver and Utility files will be copied to your system directory.

5. Select “No” and then click “Finish” to complete the installation (It is recommended to select

“Yes” for Windows 98).

6. The shortcut will appear on your desktop. By click this icon, you can run the Utility

program.

You will also find a shortcut “WLAN Manager” at Start\Programs\Startup Menu as shown

below:

7. After click the shortcut, an icon will appear on the bottom right of the screen. Right click

that icon and select open, the WLAN Utility will pop-up on the screen.

2.1.2 Install the WLAN card

The WLAN driver and utilities are included on the accompanying installation CD.

Please follow the installation procedures in Section 2.2. (Your WLAN card will not work

properly if the driver and utilities are not installed correctly).

Make sure that there is an empty WLAN slot (for example PCMCIA, USB, mini-PCI) for

WLAN card.

Insert the WLAN Card and the installation will start automatically. When the WLAN card

setup task is completed, you can run the WLAN Utility.