User's Guide Part 1

33
Select the “Encryption” tab. If you want to enable the function, please set the Data
Encryption to WEP.
WEP encrypts each frame transmitted from the
radio using one of the Keys entered from this panel.
To be written to the driver and registry, each key
must consist of hex digits, which means that only
digit 0-9 and letters A -F are valid entries. I f entered
incorrectly program will not write keys to a driver.
* For more detailed setting, please refer to QUETEC
SoftGate Security section.
The “I nfo” tab shows the detail including Driver version, Configuration Utility, and
NIC firmware version. Users must use this version number when reporting their
problems for technical support.