User's Guide Part 1

30
z Client mode function under Window s 2000-
for USB Interface only
~ This section is only for SoftGate USB solution under station mode. For the PCMCIA
and PCI solution, please refer to PCMCIA and PCI section. ~
You can find the wireless client utility icon in the system tray when you are in
Station mode. Double-click the crab icon, following dialog box will appear.
The “NetStatus” tab shows the Link Status, Network mode, SSI D, Channel, Tx.
Rate. You also can change your Ad hoc/Infrastructure network, Data Encryption,
SSI D, Channel, Tx Rate in this tab. Push “change” button to choose the items.
* Network Mode:
Two types for wireless network
-Peer-to-peer (Ad hoc) network
-Access point (infrastructure)
* Network Security:
-Support Network Authentication
-Support Data Encryption.
* SSI D:
-Show the connected AP’s SSID.
* Default set Channel:
-Show currently channel and provide the
channel selection function.
* TX Rate:
-Show currently data transferring rate and
provide the rate selection function.