User's Guide Part 1

Mode Switch Options: This setting allows you to configure SoftGate to automatically scan

for the best available settings when you switch from station to Access Point mode. Use the

pull down menu to choose the mode switch

• Auto Scan for Best Available Settings

• Prompt for Connection Settings

• Use Previous Settings

-Enter the “MAC Filtering setting” area to enable the MAC filtering function,

choice the filter method that you want to use.

The MAC filtering interface provides the capability to explicitly allow or deny a client device

access to the SoftGate enabled network. MAC filtering is a security feature of SoftGate that

is discussed in detail in SoftGate Security.