User's Manual

3
INSTALLATION OF WIRELESS 802.11g/b USB MODULE
It’s free and easy for you to install your Wireless 802.11g/b USB Module and the attached
software – WLAN-54G USB Configuration Tool. Simply with a few clicks of the mouse, you will
succeed the installation.
2.1 Installation Procedures
To have the Wireless 802.11g/b USB Module operated appropriately, please read and go along
with the step-by-step instructions below carefully. Here we take the installation on Windows XP
operating system as the standard flow. The flow might be slightly different while installing it on
different version of Windows, and all differences have been highlighted under the specified steps.
Confirm the Existence of the Module
a) Right-click My Computer desktop icon and choose Properties from the opened menu.
b) In the System Properties dialog box, select the Hardware Device tab, and then click
the Device Manager button.
c) In the opened window, expand the Other devices item, if there is an unknown USB
Device displayed, the hardware has been built inside your computer system and you
may go along with the steps below now. If the device has not been displayed, please
contact your distributor.
Figure 2.1-1: The Device Manager Screen Before Installation
Installation Procedures
a) Once your system detects the device, the Found New Hardware Wizard dialog box