User manual

2.7 - Connecting a Computer
1.Turn off the power to the LCD TV and Computer.
2.Connect a 15-pin D-sub VGA cable to the VGA output of your computer and the other end to the
VGA input in the rear of your LCD TV.
3.Connect the Audio Out on your computer to the VGA Audio in the rear of your LCD TV.
4.Turn on the power to your LCD TV and computer.
5.Select VGA using the INPUT button on the front of the LCD TV or directly by pressing the VGA button on
the Remote Control.
Note:
a) For the best picture quality when computer through VGA, set your computer timing mode to VESA
1366x768 at 60 Hz or 1024x768 at 60Hz. Please refer to the graphic card's user guide for additional
information on how to set the timing mode.
b) Refer to your Computer's user manual for more information about the video output requirements of the
product.
Y-2
Pb/Cb-2
Pr/Cr-2
Y-1
Pb/Cb-1
Pr/Cr-1
L-2
R-2
L-1 R-1
HDMI-IN VGA IN
L
R
S-VIDEO IN
VIDEO IN
L-3 R-3
L-4 R-4
DIGITAL
AUDIO
OUT
IN
COAXIAL OUT
VIDEO OUT
AUDIO
OUT
L
R
AUDIO
IN
AUDIOAUDIO
AUDIOAUDIO
DIGITAL HD
W R
www.astarelectronics.com
26
AV1