User manual

2.5.3 - Using the Antenna or Cable through Your VCR

1.Turn off the power to your LCD TV and VCR .

2.Connect the "Output to TV" (RF Out or Antenna Out) connector on the rear of your VCR to the TV

CABLE/AIR connector in the rear of your LCD TV.

3.Turn on the power to your LCD TV and VCR.

4.Select TV using the INPUT button on the remote or front of your LCD TV or directly by pressing the

DTV/ATV button on the Remote Control.

Note: If you have an off-air antenna or cable TV, connect the off-air antenna or TV cable to the RF

connector on the rear of your VCR.

SERVICE

AIR IN CABLE IN

VIDEO EQUIPMENT

with terminal