User manual

2.5 -Connecting Cocoaxial (RF)
There are several options for connecting your antenna(or cable for TV) to your new LTV-37HLS HDTV-
directly to the DTV, NTSC TV or through your VCR. Based on your home theater configuration, you can
decide which option is the right one for you.
2.5.1-Using Your Antenna or Cable for DTV
1.Turn off the power to your LCD TV.
2.Connect the cocoaxial (RF) connector from your Antenna or Digital Cable to the DTV connector in the rear of
your LCD TV.
3.Turn on the power to your LCD TV.
4.Select DTV using the INPUT button on the front of the LCD TV or directly by pressing the DTV/ATV
button on the Remote Control
Note:
a)Digital broadcasts are not available in all areas.
b)Make sure the antenna is correctly grounded.
c)For professional antenna installation, please contact Astar Electronics at 1-877-851-2528 or
visit our website at www.astarelectronics.com.
SERVICE
AIR IN CABLE IN
www.astarelectronics.com
23
2.5.2 - Using Your Antenna or Cable for TV
1.Turn off the power to your LCD TV .
2.Connect the cocoaxial (RF) connector from your antenna, cable or cable box to the TV connector in the
rear of your LCD TV.
3.Turn on the power to your LCD TV.
4.Select TV using the INPUT button on the Remote or front of your LCD TV or directly by pressing the
DTV/ATV button on the Remote Control.(Refer to 2.5.1)