iOS User Manual Device Requirements Version: IOS system 5.0 or above. IP Camera Network Connection Please refer to "Quick Start Guide" to configure the network connection.
1. APP Installation Search “MIPC” in the App Store. Click the “download” button and “install” on your phone.
2. APP Overview The Mobile APP includes: Video online viewing, 2-way audio, PT control, snapshot, video recording / playback, software online upgrade, device settings and background alarm notification on the phone. 2.1 APP Login 2.1.1 Account registration/login and add new camera 3.Enter Email and password 2.Click "Sign up" 1.Click MIPC icon 4. Click sign up 6.Click option button 7. Add device 5. Sign in 8. Scan QR code or enter the camera device ID number and password 9.
10.Select the camera Note: The green dot on left corner indicates that the device is online, the red indicates that the device is offline 2.2 APP operation: 2.2.1 Main menu : Sound monitor : Two-way audio : Snapshot : Manual (temporary):red indicates recording.
2.2.2 Resolution settings: Choose desired resolution 1.Click option button 2.2.3 Account Password Change: 1.Click option button 3. Apply 2. Enter old password and new password 2.
2.2.4 APP settings: 1.Click option button 2.Click Settings 3.Notification options 2.2.5 Signing out of your account: 1.
2.3 Camera Settings: 1. Camera Setting 2.Select "Settings" Note: Important! You have to “Long press” the camera for 2 to 3 seconds to get the settings menu on the screen. If you just touch the camera quickly, you will get “live view” mode. 1.Long press the camera you need to set 2. Check camera information: 1.Select "About" 3. Enter camera name: 2. Enter a name for the user-defined 1.Select "Nickname 3.
4. Password setup: WARNING: You MUST change Password from default “Admin” 2. Change the password 1.Select "Admin Password" 3. Click Apply 5. Wi-Fi Setup 1.Select “Wi-Fi” 2.Select “Client mode” 3. Select the Wi-Fi connection 4. Enter the router's password 5.Click Apply 6.When screen shows “Set Successfully disconnect network (Ethernet) cable Note: After successfully linked, STATE1(STA1) flashing 3 times in each 3 second in green.
6. On Screen Display (OSD) Setting: 3.Keep“on” 1.Select “OSD” 2.Time settings 4.Click Apply 7. SD card status: 2. With SD card in, its status and capacity will be displayed. 1.Select "SD card" 3. Format: While the Micro SD (TFLASH) card is formatted, the original recording will all be cleared. Unmount: Remove micro SD card from the camera 8. Alarm Setting: 4. Back to the menu 2.Set the alarm 1.Select "Alert device" 3.
9. Date/Time Setting: 2. Time zones: Depending on the camera location, select the local time zone. Time server: Search and write your local time in the server Auto-Sync with a time server: Turned on the camera will automatically synchronize the time on the server address Date: Turn off the Auto-Sync, user can change the camera date on display. Time: Turn off the Auto-Sync, user can change the camera time on display. 1.Select "Date / Time" 3. Apply 10. Scheduled recording: 1.
12. Set the camera's audio, image flip, power frequency 2. Speaker: Adjust the speaker volume Microphone: Adjust the microphone volume Flip: Flip camera view upside down Power frequency: 50HZ/60HZ options, based on user’s country 1. Choose "Others" 3. Apply 2.4 Camera Information: Unread alarm message 1. Long press and Select "Messages" 2. Click the image to view and save to the phone 2.5 Video Recording and Playback: 1.Select "playback" 2.
2.6 Remove Camera From Account: 1. Long press the camera you want 2. Select "delete" For support, Please contact toll free (866)368-8788 M-F 9-5 PST or Email: support@astak.
