User`s guide

42
If MiniMerc won’t turn on or start up:
Make sure the AC Power Adapter is plugged
into MiniMerc and into a functioning power
outlet.
n Check that the battery is installed properly and
check the Mercury Control Panel to see if the
battery is charged.
If MiniMerc does not start up
properly:
Reset it.
n Remove the battery and disconnect the AC
Power Adapter. Depress the Power button for
several seconds. Then reconnect the AC Power
Adapter and press the power button.
If that does not work, or if you hear a strange
sound during startup:
n Contact Assistive Technology, Inc.
What if I have a problem?
If MiniMerc won’t respond, the
pointer won’t move, or the display is
dim:
Tap the screen. It may take a few seconds to
respond.
If not, try to cancel what MiniMerc is doing:
n Press the <ctrl><alt><delete> keys
simultaneously. Choose Task Manager and
then click on the End Task button.
n If the MiniMerc does not respond, press the
<ctrl><alt><delete> keys simultaneously and
click on the Shutdown button in Task Manager.
If your MiniMerc still doesn’t respond, restart it.
n Press and hold the Power button for five
seconds to shut down the MiniMerc, then press
the Power button again to restart it.
If the problem occurs when you use a certain
program:
n Check with the program’s manufacturer to see if
it is compatible with MiniMerc.
If the problem occurs frequently, contact Technical Support at
Assistive Technology, Inc. at 1-800-793-9227. Note: before
calling ATI, find the MiniMerc’s serial number, located on the
sticker on the rear of the device. You will need to give the ATI
Technical Support Representative this number when you call.