User`s guide

12
Turn headphone preview
on or off (see page 37).
Click to calibrate the
touchscreen (see page 30).
Use this check box
to restrict access to
Setup options by
requiring a
keyboard to type
<Alt-S>.
If you click the Setup button on the Mercury Control Panel, you will see the Main Setup screen.
Use this check box
to restrict access
to Setup options by
requiring a
password (entered
at the right).
Click on the tabs below to switch to different setup screens.
Type the same password in
both boxes, then click Set
Password. This password
will be required to enter
this Setup screen. Be sure
to keep a record of your
password in a safe place.
Click OK to keep these settings
and exit Setup.
Click Cancel to exit Setup
without keeping changes.
Click Apply to keep these
settings and continue in Setup.
For Speed Buttons, see p. 13.
For Switches, see p. 32.
For Remote Control, see p. 20.
For Power, see p. 40.