Assembly Instructions
AN2009-01
Storage and Transport
Application Note 27 V2.2, 2015-02
13 Storage and Transport
During transport and storage of the modules, extreme forces through shock or vibration have to be avoided as
well as extreme environmental influences.
Storage of the modules at the limits of the temperature specified in the datasheet is possible, but not
recommended.
The recommended storage conditions according to Infineon TR14 (Application Note “Storage of Products
Supplied by Infineon Technologies) and IEC60721-3-1, class 1K2 should be assured for the recommended
storage time of max. 2 years.
Max. air temperature: Tmaxair=+40°C
Min. air temperature: Tminair=+5°C
Max. relative humidity: 75%
Min. relative humidity: 10%
Condensation: not permissible
Precipitation: not permissible
Iceing: not permissible
Pre-drying of the case prior to the press-in process as it is recommended for moulded discrete components (e.g.
microcontrollers, TO-cases etc.) is not required for Easy B-series modules.