Specifications

11
eBoss
®
Stand-alone Keypad Access Locks and Exit Device Trim
Model No. Front Backset Throw Front Width Latch Diameter
694 Beveled 2-3/4" 1/2" 1-1/8" (29mm) 1" (25mm)
F694 Flat 2-3/4" 1/2" 1-1/8" (29mm) 1" (25mm)
3694 Beveled 3-3/4" 1/2" 1-1/8" (29mm) 1" (25mm)
480B Beveled 2-3/4" 3/4" 1-1/8" (29mm) 1" (25mm)
F480B Flat 2-3/4" 3/4" 1-1/8" (29mm) 1" (25mm)
3480B Beveled 3-3/4" 3/4" 1-1/8" (29mm) 1" (25mm)
Note: To order with lockset, specify model number. To order separately, specify model number and nish.
For Model No. 495
#8-8-32 x 3/4" (19mm) Phillips flat head combination
wood and machine screws.
P/N 81-2012-0416
For Model Nos. 2815, 2816, 718, 497, and 497B
#12-12-24 x 1" Phillips flat head
combination wood and machine screws.
P/N 81-2012-0620
Note: When ordering strike or attaching screws individually, specify the nish required; i.e. 497 x 202 x 606.
attaching screws
deadlocking latchbolts for cylindrical
additional strike options
Model No. 202 Strike Box for ANSI Strike (Optional)
Available to special order. Specify 2815 x 202 or 497 x 202.
497B ANSI Blank Filler Plate (Optional)
Reversible to replace a strike where a lock has been removed or
where a frame with a strike preparation when no lock is installed on
a door. Lip Lengths: 1-1/8" (29mm) only.
The following strikes are available as options for both mortise and cylindrical locks.
(Not regularly supplied when strikes ordered separately).
attaching screws
For all latchbolts
#8-32 x 3/4" (19mm) Phillips flat head combination
wood and machine screws
Brass - P/N 81-2022-0416*
Bronze - P/N 81-2032-0416*
Hollow Metal Doors
#8 - 32 x 1" (25mm) Phillips flat head machine
screw
Brass - P/N 81-0022-0420*
Bronze - P/N 81-0032-0420*
*Specify nish required.
(Not regularly supplied when latchbolts ordered separately).