Specifications

eBoss

Stand-alone Keypad Access Locks and Exit Device Trim

eBoss

mortise locks are supplied standard with a 2815 curved lip strike with a 1-1/4" (32mm) lip length

for doors 1-3/4" (44mm) thick. Mortise lock strikes are mounted 3/8" above the center line of the lock. To

determine the proper length of lip use the following formula: 1/2 of the door thickness, plus 1/16" inset, plus

trim thickness, plus 1/8" for flat lip strike OR 1/4" for curved lip strike. Select the nearest available length. These

strikes are non-handed.

eBoss cylindrical locksets are supplied standard with a 497 ANSI strike. A variety of options are available.

All strikes are located on the same vertical and horizontal center lines as the latchbolt. Strikes are available in

a variety of lip lengths to accommodate varying thickness of doors and frames. To determine the proper length

of the lip, measure from the center line of the strike to the edge of the jamb and add 1/4" (6mm). All strikes are

non-handed.

strikes

Model No. 497 ANSI Strike (Standard)

1-1/4" curved lip supplied standard. 1-1/8", 1-1/2”, and 1-3/4" lip

lengths available by special order. For door and frames with ANSI/

BHMA A156.115 preparations.

Model No. 495 Strike (Optional)

1-1/4" curved lip, wrought box supplied. 1", 1-1/2", 1-3/4" and 2"

curved lip lengths available by special order.

See following page for additional strike options.

Model No. 2815 Strike (Standard)

1-1/4" curved lip supplied standard.

1-1/8", 1-3/8", 1-1/2" lip lengths

available by special order.

Model No. 2816 Strike (Optional)

Flat lip strike to special order. 1-1/8",

1-1/4" (32mm), 1-1/2"

718 Open Back Strike (Optional)

Field handable for a standard V-beveled pair of doors with

a latchbolt only function on the active door. This strike

permits emergency opening of the inactive door without

damaging the lock mechanism. Available for doors 1-3/4"

or 2-1/4" thick only. Specify the door thickness required.

Black powder coat finish (693) only.

See following page for additional strike options.

mortise

cylindrical