Specifications

CL33700 PWI/PIP Series Cylindrical Lock
14
Copyright © 2014 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
5) Installation Instructions (Continued)
Fig. 12a
Board-to-Board
Connectors
Fig. 12b Detail
a. Insert bottom tab of controller into slot on mounting plate (Fig. 12a, b).
b. Looking down from top of controller, ensure proper alignment of board-to-board connectors (Fig. 12b)
while pivoting controller toward door until two tabs on top snap securely into place on mounting plate
(Fig. 12b).
CAUTION: To avoid possible damage to board-to-board connectors, care should be taken when securing
controller to mounting plate. If there is resistance when securing, detach controller to determine cause before
re-attaching controller.
Fig. 12b