Specifications

CL33700 PWI/PIP Series Cylindrical Lock
13
Copyright © 2014 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
Lock
Body
(10-pin)
DPS
(4-pin)
Reader
(24-pin)
9-24VDC
Power*
Fig. 12a
Board-to-Board
Connector
CAUTION - Do not touch or allow debris to enter connector contacts.
*NOTE: Optional 2-pin external 9-24VDC power connector.
11. Installation of Connectors
Secure the following connectors to their respective terminals (Fig. 12a, b ):
a. Secure the 2-pin DPS connector.
b. Secure the 10-pin lock body assembly connector.
5) Installation Instructions (Continued)
Fig. 12b
C
A
B
Wire Positioning:
Please follow these steps prior to installing
inside escutcheon to prevent any damage
caused by pinching wires:
c. Tuck excess cable into wire hole on inside of door.
d. Finish securing mounting plate and reader to door by fully
tightening through-bolts on inside of door (Fig. 10E).
e. Secure the 24-pin card reader connector.