Manualshelf

User's Manual

ManualsBrandsASSA ABLOY Identification Technologies ManualsElectronicsInductive Tag Reader Module
919293949596979899100
ACG HF Multi ISO RFID Reader V1.0
ACG Identification Technologies GmbH 91
12.4.3.24 Reset
This command executes a power on (software) reset. New configuration settings will
be loaded. It resets all tags in the antenna field.
Command
Command Data
'x' None
Answer
Answer Description
MultiISO 1.0' + <CR> +
<LF>
ASCII Mode
None Binary Mode
12.4.3.24.1 Disable Start-up Message
If the start-up message is disabled in the protocol configuration register 2, the ASCII
mode does not respond with the version of the reader.
12.4.3.24.2 Reset Timing
The power up timing depends on environmental conditions such as voltage ramp up.
For handheld devices the timing can vary based on the charge state of the battery.