User's Manual

ACG HF Multi ISO RFID Reader V1.0

ACG Identification Technologies GmbH 151

ISO 14443 Type A only commands

Increment value block 18.4

Decrement value block 18.4

Copy value block 18.5

Read value block 2.3

Write value block 7.9 - 10.5

mifare

Power conditions

Power on 79 Does not include rise time of power supply

Enable on 85

Figure 17-1: Timings

Default Command Guard Time (20h = 1.2ms) was used.

All timing data is advisory application information and does not form part of the

specifications. It may change in future firmware releases. Please also note that all

values specified in the above table depend on the tag used and Command Guard

Time.