Manualshelf

User's Manual

ManualsBrandsASSA ABLOY Identification Technologies ManualsElectronicsInductive Tag Reader Module
121122123124125126127128129130
ACG HF Multi ISO RFID Reader V1.0
ACG Identification Technologies GmbH 128
13.7 Using NFC
The example shows how to communicate with NFC using the NFC demoboard
PN531.
The reader is the initiator. The NFC has to be configured as passive target using
mifare
®
106kbps (other NFC modes are not supported).
As first step place the reader on top of the NFC demoboard antenna in 3 cm
distance.
Then load the "passive_target_106.cmd" file from the "Scripts\Tama\P2P" subfolder
into the SCRTester application. Run the code.
Now it is possible to get a serial number from the NFC:
Command Answer
s 08123456
Figure 13-6: Get a serial number from NFC