User's Manual Part 1

13,56 MHz Multitag Reader Module, Version 0.9v
ACG Identification Technologies AT Page 33
5.3.13 Set tag type
This command switches the reader to a specific tag type. The continuous read
function will speed up because only this tag type is recognized. These changes are
not stored into the EEPROM. After a reset the reader starts as defined in the startup
configuration.
5.3.13.1 Command
Command Data
‘o’ Leading character (1 byte)
5.3.13.2 Answer
Answer Description
none String of tag type
5.3.13.3 Leading character
Tag type String Description
‘a’ “ALL” All tag types
‘i “ICODE“ Icode®
‘m’ “ISO14443A” Mifare® Ultralight, ISO 14443 Type A
‘s’ “SR176” SR176
‘t’ “TAGIT” Tagit®
‘v’ “ISO15693” ISO 15693
‘z’ “ISO14443B” ISO1443 Type B
Figure 5-16: List of leading characters
5.3.13.4 Example
Command Description
ov ISO15693
Set the reader device to ISO15693 tags