User's Manual Part 1

13,56 MHz Multitag Reader Module, Version 0.9v
ACG Identification Technologies AT Page 24
5.3.4 Reset
This command executes a power on (software) reset. New configuration settings will
be loaded.
5.3.4.1 Command
Command Data
‘x’ none
5.3.4.2 Answer
Answer Description
none ASCII Mode: “ISO 1.0” + CR + LF
Binary Mode: none
This command will reset the reader module as well as all tags in the antenna field.
The reader starts according the startup settings.
5.3.4.3 Reset Timing
The power up timing depends on environmental conditions such as voltage ramp up.
For handheld devices the timing may depend on the charging state of the battery.
5.3.5 Get Version
This command returns the current version of the reader module.
5.3.5.1 Command
Command Data
‘v’ none
5.3.5.2 Answer
Answer Description
none ASCII Mode: “ISO 1.0” + CR + LF
Binary Mode: 02 00 07 49 53 4F 20 31 2E 30 31 03
5.3.5.3 Example
Command Description
v ISO 1.0
Version of the reader module