User's Manual Part 1

13,56 MHz Multitag Reader Module, Version 0.9v
ACG Identification Technologies AT Page 17
5.2.6 ETX
End of transmission. (03h)
5.2.7 Remarks
If the reader device receives an invalid instruction frame (i.e. BCC wrong) or the
requested station ID does not match the internal ID of the reader, the command is not
executed. The reader waits for the next valid frame.
Use the binary timeout (see protocol configuration register) to detect incomplete
binary frames.
5.2.8 Examples:
02h 64h 01h 78h 1Dh 03h
STX Station ID Length ‘x’ BCC ETX
This instruction frame will reset the reader module with the station ID 64h.