Installation guide

87
English
X99 OC Formula
Advanced Setting
ODT WR (CH A)
Congure the memory on die termination resistors' WR for channel A.
ODT PARK (CH A)
Congure the memory on die termination resistors' PARK for channel A.
ODT NOM (CH A)
Use this to change ODT (CH A) Auto/Manual settings. e default is [Auto].
ODT WR (CH B)
Congure the memory on die termination resistors' WR for channel B.
ODT PARK (CH B)
Congure the memory on die termination resistors' PARK for channel B.
ODT NOM (CH B)
Use this to change ODT (CH B) Auto/Manual settings. e default is [Auto].
ODT WR (CH C)
Congure the memory on die termination resistors' WR for channel C.
ODT PARK (CH C)
Congure the memory on die termination resistors' PARK for channel C.
ODT NOM (CH C)
Use this to change ODT (CH C) Auto/Manual settings. e default is [Auto].
ODT WR (CH D)
Congure the memory on die termination resistors' WR for channel D.
ODT PARK (CH D)
Congure the memory on die termination resistors' PARK for channel D.
ODT NOM (CH D)
Use this to change ODT (CH D) Auto/Manual settings. e default is [Auto].
MRC Fast Boot
Enable Memory Fast Boot to skip DRAM memory training for booting faster.