User manual

M8
36 37
English
3.2.2 Installing the Graphics Card
e M8 chassis supports both single-slot graphics card and dual-slot graphics card.
1. Open the latch of the VGA card holder and remove the screws that secures the slot
cover.
2. Remove the slot cover(s) on the VGA card holder.
3. Place your graphics card to the VGA card holder and secure it using screw(s).
4. Close the latch to make sure the graphics card is securely seated.
VGA card holder
11
0-120mm
VGA support
130-140mm
*If the graphics card you are using is over-height, use the VGA support to secure the card.
Before graphics card installation, please li the VGA card holder and make sure the riser
card is installed properly.
Standard-height card Over-height card