User manual

28 29
English
3.1.6 Replacing the ODD
1. Follow the instructions in section 3.1.5.2 to remove the power supply unit and li the
tray o the chassis.
2. Remove the old optical disk drive.
3. Slide a new optical disk drive into the ODD tray.
4. Attach the optical disk drive to the ODD tray using screws.
5. Connect the ODD SATA power connector.
6. Follow the instructions in section 3.1.5.2 to replace the ODD + 2.5" HDD Tray and the
power supply unit.