User manual

M8
24 25
English
3.1.5.2 Installing the Hard Drive to the ODD + 2.5" HDD Tray
Installing a 2.5-Inch Hard Drive
1. Remove the PSU.
1
2
3
Unplug the PSU power cable.
Remove the two screws securing the power supply unit.
Slide the PSU to the right until it releases. Li the PSU and set it aside.
1. To install the hard drives, you have to remove the PSU.
2. e ODD + 2.5” HDD Tray ts a slim slot-in optical disk drive (ODD) and a 2.5-inch
hard drives.
3. Hard drives are not included with this system.
1
2
3