User manual

22 23
English
3.1.5 Installing the Hard Drives
3.1.5.1 Installing the Hard Drive(s) to the Drive Tray Assembly
1. Remove the drive tray assembly.
1
3
2
Remove the screw that secures the drive tray assembly to the chassis.
Slide the drive tray assembly toward the front of the system to disengage it from the
latches.
Li it away from the chassis.
1. To install the hard drives, you have to remove the VGA card holder and the riser card ,
giving you access to the drive tray assembly inside.
2. e drive tray assembly supports up to four 2.5-inch hard drives. You can also choose to
install one 3.5-inch hard drive.
3. Hard drives are not included with this system.
1
2
3