Specifications

71
3· Check the Control Board Serial Connection. (That is the common problem Point).
(attached 2 pictures: Correct and Error “Please Wait”). This connection is very easy to lose
during transport, or when we work at that area.
4· If all the 3 points are good, then check the Control Board Red LED is ON.
5· Check that the USB Adaptor (Camera zoom) is correctly connected at the right USB
plug (bottom right).
6· Use the Boot-DVD to restore the PC and congure all components again.
Soon or later, all the customers will face this problem, the only way to x it is by get the
printer ready to print and the Control Board Serial Cable Correctly connected all the way
in. This problem will not disappear by replacing the PC.
Red LED is ON
USB Adaptor (Camera zoom)